EP Skinbooster

Product image

Seasonal/Limited

1/5

Basic Product Information

0 no(s)

Free Shipping

EP Skinbooster

Non-Member PriceSGD288.00

Member PriceSGD250.00

Product number S00791

Nudge

1 Added to cart

Delivery Information

Free Delivery with minimum SGD 150.00
* All product prices are inclusive of 9% GST.

Total Product Price

0Unit(s) SGD 0

Boost cosmetic absorption for
deeply nourished, firm skin!

Atomy EP Skinbooster

Skin beauty device

Experience faster and more effective results with skinbooster that enhances nutrient absorption!

POINT 01

Revolutionary Multi-Wave EP Technology Maximizes Skin Absorption of Active Ingredients

Featuring patented Electroporation technology and Atomy’s unique solution

When Applying Skincare Products Manually

Product

Skin Barrier Layer

When Using the EP Skinbooster

Product

Skin Barrier Layer

Multi-wave EP pulses temporarily create pathways to penetrate skin cells

Enhances penetration and absorption of skincare ingredients

Pathways are restored, allowing for deeper and more effective absorption

Clinical Trial Results

Improvement in absorption rate

2.23 times

Without Skinbooster

With Skinbooster

A Skinbooster enhances absorption by 2.23 times

Improvement in penetration depth

Without using a skinbooster

With Skinbooster

1.33 times

1.33 times deeper penetration of cosmetic ingredients

Gets through the tough stratum corneum, the main barrier to absorbing cosmetics

Measurement data taken 1 hour after using EP Skinbooster for 10 minutes

*Clinical results based on 5 healthy adult women (aged 41.4 ± 4.3) from the Skin Bioengineering Center at Kyung Hee University, additional clinical trials in progress

*Applied under conditions of 37V voltage + multi-frequency (10-60 kHz)

*This device is a skincare device and not a medical device. It does not provide any medical efficacy or effects related to its product functionality, apart from cosmetic benefits.

POINT 02

Four modes, each for different skin concerns

BLUE

─
Boosts the absorption of cosmetic ingredients, perfect for a wide range of skincare products
─

(Heat function applied by default)

Suggested use duration:
5 minutes

WHITE

─
A mode for brightening and rejuvenating skin care products
─

(Heat function applied by default)

Suggested use duration:
2 minutes

PURPLE

─
A mode that enhances absorption and improves skin elasticity with a massage
─

Suggested use duration:
2 minutes

RED

─
A mode that boosts absorption with gentle heat around 40 degrees Celsius
─

(Heat-only mode)

* At the lowest intensity, there's no vibration, but vibration starts from the second level onward.

Suggested use duration:
5 minutes

POINT 03

Select from 3 different intensity levels to suit your preferences and desired stimulation

Level 01

Level 02

Level 03

POINT 04

Multiple safety systems that bring an extra dose of peace

MCU

After the recommended usage time for each mode is reached, the device will automatically power off. Additionally, if you're using it, the usage time will extend according to the specific recommendations for each mode.

Thermistor

Ensures a precise safety temperature to prevent any overheating of the probe.

Bimetal sensor

Provides dual temperature safety control to ensure reliable operation and added safety.

Usage Instructions

1

Please make sure to charge the device before use.
2

Massage your face while applying with the device.
3

When you charge the device, it enters charging mode and temporarily suspends all functions.

To power on, press and hold the power button, then briefly press it again to choose your preferred intensity level.

* Before you begin, make sure to apply a sufficient amount of Atomy ampoule and give yourself a nice massage

Wrap your hand around the side of the Skinbooster.

* When you wrap your hand around the side, it will start working.

After selecting your desired mode, gently place the device in contact with your skin.

* If the button lights up, it means it's in Blue mode and ready to go!
(Only Blue-White-Purple-Red)

After you're done with the massage, clean off any residue with a wet wipe.

※ Make sure to use the provided Type-C cable while charging to ensure a power input of 5V, 1A.

How to boost the sheet mask

When applying the sheet mask, make sure to spread it evenly on your face for a good fit and adhesion to the skin.

When using the product's probe, gently move it on top of the sheet mask as if giving a massage.

Since gel-type sheet masks can make it difficult for electro-pulses to pass through, it might not provide the desired boosting effect.

Usage Precautions

Do not use on the following areas:

Do not use horizontally across the upper and lower eyelids.
Do not use horizontally across the lip area and lips.
Do not use on the central line of the neck and the carotid artery area.

Use after charging.
Please use the dedicated charging cable.
When discharged, the device will not operate and the rear LED will flash red.
In this case, please charge the device.
Before use, we recommend removing all jewelry such as earrings and necklaces.

Always apply cosmetics before use.
The default usage time for this device is 5 minutes for Blue and Red modes, and 2 minutes for White and Purple modes.
Start with a low intensity and gradually increase it after adaptation.

If your face becomes red, itchy, or shows repeated purulent inflammation during use, discontinue use.
Do not use on freshly shaved, waxed areas, or areas with wounds or other abnormal skin reactions.
Avoid using in humid places or during bathing.
Be cautious of burns.
Do not use on one area for too long during use, as it may cause skin irritation.

Do not use this device for purposes other than its original intended use as a facial care device.
Using products other than the recommended cosmetics with this device may cause deformation or discoloration of the device.
When using the device on someone else's face, hold the handle with the opposite hand or any other body part that makes contact with the other person. In this case, the efficiency of the device may decrease.

Storing the Device

Ensure the power is turned off when the device is not in use.
Do not disassemble or damage the device.
Do not place the device in a sealed car, near fire, or in high temperature environments.
Store the device out of reach of infants and children, and prevent children from playing with it.
After charging, separate the device from the cable for storage.
Clean the skin contact area after each use.

Device Usage and Storage Precautions

Do not drop or subject the product to impact or place heavy objects on it, as this may cause malfunctions.
Do not disassemble or repair the product.

This product is not waterproof. Store it to prevent direct contact with water.
If the product is submerged in water, immediately disconnect the charging cable, dry it with natural or fan air, and check its operation.
Do not immerse or wash the product with running water. Clean it thoroughly with tissues, cotton pads, or a soft cloth.

Do not use ovens, hair dryers, or heaters to dry the device at high temperatures.
Do not clean the device with flammable substances such as alcohol, benzene, or thinner.
Vigorously cleaning of the device’s surface can cause damage.
Do not insert sharp objects into the device's crevices, as this may cause malfunctions or improper operation.

Avoid places where heat is generated, such as heaters. It can cause fire.
Avoid using and storing the device in enclosed spaces with high temperatures, such as a sealed car or places with a lot of fire hazards.
Do not store the device in places with extremely high or low temperatures or high humidity.
Avoid using the device in dusty areas to prevent fire hazards.

Ensure the device is turned off when charging.
When not in use for a long period, store the device with the power off.
Do not use the device until the battery is completely discharged. Please charge it regularly.
Frequent complete discharge can shorten the lifespan of the product.
Please use only the provided charging cable.
If any abnormalities occur with the product, please stop using it immediately and refer to the user manual.
If the product abnormalities persist, please contact the customer support center.

Do not use in the following cases

Infants, children, adolescents under 18 years old, and pregnant women
Patients with epilepsy, various seizure disorders, and cancer patients (especially skin cancer)
Patients with implanted pacemakers, internal cardiac defibrillators, or similar electrical stimulators, or patients with cardiovascular diseases.

Patients taking steroid-based medications.
Areas with dry skin, wounds, or severe skin conditions such as severe acne, sunburn, or infection.
Individuals with sensitive skin, allergic skin, or specific sensitivities

Areas that have undergone surgery, laser or chemical peeling procedures within the past 3 months
Areas where dental implants or metal prosthetics have been applied.
Within 2 weeks of receiving cosmetic procedures, including chemical or mechanical peeling, laser peeling, fractional laser, mesotherapy, or other procedures involving skin fillers.

Mucous areas (oral, nasal, genital, ocular mucosa, etc.).
Individuals with symptoms of telangiectasia
Fractured areas, endocrine abnormalities, sensory nervous system abnormalities, and individuals with fever.

* This device is a cosmetic device and not a medical device. It does not provide any medical efficacy or effects beyond cosmetic benefits related to its product functions.

Product Information

EP Skinbooster

Product Name	Atomy EP Skinbooster]
Model Name	ASB-KR21EP
Key Functions	Promotes skin absorption of cosmetics through electroporation
Intensity Display	1-3 levels LED
Mode	Blue, White, Purple, Red
Output Method	Monopolar output through electroporation
Additional Features	Vibration motor, thermal heater
Charging Method	Standard USB Type C (Connect to computer USB port or phone charger)
Recommended Usage Time	Once a day, 5 minutes for Blue and Red modes, 2 minutes for White and Purple modes
Total Usage Count	20 sessions (based on 5 minutes of usage once a day)
Battery	Built-in lithium polymer 3.7V 1200mAh battery
Input Power	DC 5V, 1A or higher
Charging Time	Approximately 2 hours (based on 5V 1A charger from a discharged state) Please use the included charging cable for charging. Charging time may vary.
Product Composition	Main device, a pouch, a USB Type C charging cable, and a product manual
Product Size	42.3mm (W) X 43.92mm (L) X 183.83mm (H)
Weight	146g

This product adheres to the principles of using
good raw materials, optimized technology,
and thorough quality control.
Each step of the production process strictly follows
ATOMY’s meticulous quality assurance standards,
from the selection of raw materials to the
creation of the finished product.

The product is only manufactured in safe facilities that have passed
stringent supplier registration tests.
Regular on-site and cross-facility inspections of our partner companies
are conducted through a third-party certification body.
This allows us to ensure we manufacture products of the absolute quality.

HOME APPLIANCE

Ensuring the safety and stability of the product in accordance with legal standards
Regular testing for harmful substances
Verification of raw materials / suppliers / labeling / certification
Direct verification from raw material intake to product shipment
Ongoing inspection of product specifications (appearance, weight, dimensions, packaging, performance)

See more information

Shipping Period

- Will usually ship within 1-3 business days of receiving payment. Delivery time may vary depending on the area and circumstance (unexpected weather, temporary out of stock, unmatched ID number payment, incorrect postal code, etc.).

- Weekend and public holidays will be exempt from shipping period.

Shipping Area

- Singapore-wide.

Delivery Fee

- Free home delivery for orders SGD 150.00 and above.

- For orders less than SGD 150.00: SGD 10.00 Delivery Fee.

Shipment Status

1. Right shortcut menu > Order / Shipping

2. My Atomy > Order / Shipping

Change Shipping Address

- You must contact the customer support center.
Payment Methods

- Credit card, Debit card

Cards Accepted

- Visa / Master Card
Cancelling Order

- Orders cannot be cancelled once the order is complete.

- For more inquiries, call the customer support center (+65 6797 9570).

Return / Exchange

- If for any reason you are not satisfied with our products, all products are returnable within 60 days if the product is in the same condition as when purchased, including the product packaging, or if you discover any product defects. Product cannot be returned/exchanged if:

Product cannot be returned/exchanged if:

- We cannot accept returns for used products or for individual items that belong to a set.

- Members cannot return products if:

1. The product exceeds 3 months from the date of purchase.

2. The product is damaged due to the sales representative's responsibility.

3. The value of the product has been reduced due to partial use.

4. The wrapping of products that can be duplicated has been damaged.

Application Period for Refund/Exchange

- The company will exchange or refund if you notify the company within sixty (60) days of the date of purchase.

Note

- You must return the product to Atomy Distribution Pte. Ltd. during office hours together with the original sales receipt.

- All return shipping costs (if any) must be paid by you.

- Products sent to the company without prior company approval will not qualify for a refund or exchange and will be returned to you at your expense.

- Procedures may vary in jurisdictions where different requirements are imposed by law.